10 Basic Carpentry Tips for Beginners

It is likely that at some point you have thought about dedicating yourself to carpentry, even if it was an amateur or hobby. Then, from Cronoshare we present you with a series of basic carpentry tips for beginners, useful for all those who want to start in this world.

Basic carpentry tips for beginners

1. Have varied tools:
If you are starting in the carpentry you will not have many tools, but they should be varied. In addition to the workbench, you should have tools for measuring and marking, sawing, brushing, sanding and some auxiliary tools.

2. Keep your tools well:
For a correct conservation of the tools, these cannot be stored in any way. Tools that have a delicate edge, for example, should be kept in a suitable position so that it is not damaged by its bad position or contact with other tools.

Try to store the tools in dry places to prevent them from rusting and deteriorating. If you order them by their function you will also avoid having to be scrambling every time you need to search for one.

3. Buy or build a good workbench:
You can not do good carpentry without a good workbench. Acquire or build a broad workbench, which allows you to do all kinds of works. Try to be in a secluded place, where it does not disturb or interfere with other rooms in the house.

Try that the workbench is well preserved and clean since it will be the place where you will carry out all your projects.

4. The measures are very important:
Always measure the materials you are going to use for a project, the workspace, the place where you will place the work … Take measurements of everything you can, since a bad measurement can create a domino effect that can have disastrous effects on the final project.

5. How to sand a surface:
When working with wood, sanding is a fundamental step to prepare the surface. If you have no experience in the matter, experts recommend starting with a coarse sandpaper and then finish with a finer sandpaper. It is also important to sand in the direction of the grain.

If you want to know if a sandpaper is of good quality, the simplest thing is to fold it. If grains fall, the paper is not of the recommended quality and it will be better to use another.

6. Safety first:
Put the security and physical integrity in your list of priorities. Use the right clothes, wear gloves and protective glasses to do the work. Wearing a safety boot is also a recommended option in case you drop some heavy object on your foot.

7. How to varnish wood:
After sanding, varnishing wood is another of the most important phases in carpentry. In this case, we have to pay attention to two very important aspects: the brush, which should be as large and as flat as possible, and the porosity. Check if the wood is more or less porous to choose the best varnish and know how many layers apply.

If the wood has small details, use a smaller and round brush to varnish them.

8. How to avoid the chipping of wood:
One of the main problems that arise when cutting wood is chipping. That is to say, when cutting the wood it splinters and a clean cut does not take place. There are several ways to avoid it.

The most important thing is that your tools are in good condition and well sharpened. Also, make sure you use the correct saw for each type of wood. Not all tools will cut the same in all materials. Another trick is to use a piece of discarded wood as a support for the piece you are going to cut.

9. How to drive nails without getting hurt:
Surely to start in the world of carpentry one of your biggest concerns was how to drive a nail without suffering in the attempt. There are several tricks that will facilitate this task. If the nail is large, you can use the prongs of a comb to hold it while you nail it. If it is smaller, you can nail it on a piece of cardboard or poliespán so that it is straight at the time of nailing it, without you having to use your fingers.

10. Practice a lot:
Practice makes a master. Although at first, it costs you to carry out some projects, keeps trying. No one is born learning, and carpentry is a technique that can be improved with perseverance and practice. Read articles, search videos on YouTube, invent, be creative …

There are many ways to improve your skills in carpentry!

Trust a professional
If you see that a project is getting out of hand or you do not have enough skills to carry it out, do not hesitate to hire a professional carpenter. Leaving the project in good hands will avoid risks to your health and you will not damage the materials, which can sometimes have a high cost.

At Cronoshare we have the best carpenters, who can help you carry out any work or project. You just have to ask for a budget through this link for free and without commitment, and you will begin to receive in your email the professionals closest to you. You can contact them, ask for a price and reach the best agreement between the two parties. In just a few steps you will have hired the carpenter that best suits your needs.

Leave a Reply

Your email address will not be published. Required fields are marked *